Subtotal: ₨ 1,090
Shop
Showing 1–24 of 27 results
-
-
Arduino, Chassis Kits, Robotics
4-Wheel Smart Robot Car Chassis
- Double-layer acrylic chassis
- 4 x DC motors with rubber wheels
- Operating voltage 3-12V
- 65mm non-slip wheels
- Pre-drilled mounting holes
- Four-wheel-drive system
- Up to 0.6 m/s speed
- 2 kg load capacity
- Compatible with Arduino IDE
- Modular design
SKU: 4W-CHASSIS -
DC-DC Converters, Power Supply Modules
6009 DC-DC Boost Converter Module – Adjustable Step-Up Power Supply 3V–32V to 5V–35V
DC-DC Converters, Power Supply Modules6009 DC-DC Boost Converter Module – Adjustable Step-Up Power Supply 3V–32V to 5V–35V
The 6009 Boost Converter is a high-efficiency DC-DC step-up module that increases voltage from 3V–32V input to 5V–35V output. Ideal for powering high-voltage devices from low-voltage batteries or USB sources in Arduino and DIY electronics projects.
SKU: n/a -
Arduino
Arduino Mega 2560 R3 – ATmega2560 Microcontroller Board for Advanced Projects
The Arduino Mega 2560 R3 is a high-performance microcontroller board based on the ATmega2560. It offers 54 digital I/O pins, 16 analog inputs, 4 UARTs, and 256KB of flash memory — ideal for complex electronics projects, robotics, and automation systems.
SKU: n/a -
Arduino, IoT Boards, Single Board Computers
Arduino Nano V3.0 — Mini USB Development Board (CH340 / Original / Clone)
Arduino, IoT Boards, Single Board ComputersArduino Nano V3.0 — Mini USB Development Board (CH340 / Original / Clone)
Compact Arduino Nano V3.0 development board powered by ATmega328P, featuring 14 digital I/O, 8 analog inputs, 16MHz clock, 32KB flash, and Mini USB interface. Ideal for robotics, sensors, and small embedded projects. Fully compatible with Arduino IDE.
SKU: n/a -
Arduino, IoT Boards
Arduino Uno R3 DIP | ATmega328P | Original DIP Version | Compatible with Arduino IDE
Arduino, IoT BoardsArduino Uno R3 DIP | ATmega328P | Original DIP Version | Compatible with Arduino IDE
Arduino Uno R3 DIP version featuring the ATmega328P microcontroller with removable DIP package, 14 digital I/O, 6 analog inputs, USB interface, and full Arduino IDE compatibility — ideal for learning, prototyping, and electronics projects.
SKU: n/a -
Arduino
Arduino UNO R3 SMD
- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- Input voltage – 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- All SMD Construction.
- R3 Shield Compatible
SKU: n/a -
Arduino
DHT11 Temp & Humidity Sensor
- Temperature and humidity sensor
- 0-50°C temperature range
- 20-80% RH humidity range
- Operating voltage 3.3V-5V
- 3 pins (VCC, GND, Data)
- 1 Hz sampling rate
- 2.5 mA operating current
- Digital single-wire interface
- Compatible with Arduino IDE
- All SMD construction
SKU: DHT11-SENSOR -
Arduino, IoT Boards, Single Board Computers
ESP32 30 Pin Development Board — WiFi + Bluetooth
ESP32 30 Pin development board with built-in WiFi & Bluetooth. Ideal for IoT, automation, robotics, and wireless communication projects. Compatible with Arduino IDE.
This is an original ESP32-WROOM-32 module-based development board. Suitable for both beginners and advanced developers looking to build innovative wireless projects.
SKU: n/a -
Arduino, IoT Boards, Single Board Computers
ESP32 38 Pin Development Board — WiFi + Bluetooth Dual Core
Arduino, IoT Boards, Single Board ComputersESP32 38 Pin Development Board — WiFi + Bluetooth Dual Core
ESP32 38 Pin development board featuring dual-core processor, built-in WiFi and Bluetooth, and more GPIOs for advanced IoT, automation, and wireless projects. Arduino IDE compatible.
The 38-pin version provides more I/O options compared to the 30-pin version, making it suitable for complex projects requiring multiple sensors, modules, and peripherals.
SKU: n/a -
IoT Boards, Single Board Computers
ESP32-S3 N16R8 Development Board | Dual Type-C | WiFi + Bluetooth 5.0 | AI & IoT Ready
IoT Boards, Single Board ComputersESP32-S3 N16R8 Development Board | Dual Type-C | WiFi + Bluetooth 5.0 | AI & IoT Ready
ESP32-S3 N16R8 development board with dual USB Type-C ports, dual-core CPU, 16MB Flash, 8MB PSRAM, WiFi, Bluetooth 5.0, and AI acceleration. Ideal for IoT, AI, automation & smart devices.
SKU: n/a -
-
-
Arduino
HC-05 Bluetooth Module
- Bluetooth 2.0+EDR module
- Supports Serial Port Profile (SPP)
- Operating voltage 3.3V-5V
- 6 pins (TX, RX, VCC, GND, EN, STATE)
- Communication range up to 10 meters
- Master and slave modes
- UART interface
- 30 mA operating current
- Compatible with Arduino IDE
- All SMD construction
SKU: HC05-BT -
-
DC-DC Converters, Power Supply Modules
LM2596 DC-DC Buck Converter Module – Adjustable Step-Down Power Supply
DC-DC Converters, Power Supply ModulesLM2596 DC-DC Buck Converter Module – Adjustable Step-Down Power Supply
The LM2596 buck converter is a high-efficiency DC-DC step-down module that allows you to reduce voltage from 4V–40V down to a stable, adjustable 1.25V–37V output. Ideal for powering Arduino, LED strips, and other low-voltage devices.
SKU: n/a -
servo motor
MG90 180° Metal Gear Micro Servo Motor – High-Torque Servo for Arduino & Robotics
The MG90 180° Micro Servo is a durable, high-torque servo motor with metal gears, ideal for robotics, drones, RC vehicles, and Arduino projects. It provides smooth and accurate 180-degree rotation with added strength and longevity.
SKU: n/a -
Arduino
Raspberry Pi 4 (2GB/4GB/8GB)
- Quad-core Cortex-A72 processor (1.5 GHz)
- 2GB, 4GB, or 8GB LPDDR4 RAM (varies by model)
- Dual-band Wi-Fi (2.4/5 GHz) and Bluetooth 5.0
- 40 GPIO pins
- 2 x micro-HDMI ports (4K support)
- 2 x USB 3.0, 2 x USB 2.0 ports
- Gigabit Ethernet
- microSD storage
- USB-C power (5V)
- Compatible with Raspberry Pi OS, Arduino IDE
SKU: RPI4-2GB -
servo motor
SG90 180° Micro Servo Motor – Lightweight & Precise Control for Arduino, RC, Robotics
The SG90 180° Micro Servo is a lightweight and compact servo motor perfect for Arduino, RC vehicles, robotic arms, and automation projects. It offers precise 0°–180° rotation, fast response, and low power consumption.
SKU: n/a -
Arduino, Sensors
TCRT5000 IR Sensor Module – Line Following & Obstacle Detection for Arduino
The TCRT5000 is an infrared reflective sensor module used for line following, edge detection, and object proximity sensing. It offers fast and accurate digital output, making it ideal for robotics and automation with Arduino.
SKU: n/a
